This M10 x 132mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric properties. Its lightweight, durable nylon construction makes it a superior choice for demanding environments where metal fasteners would degrade or conduct electricity.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M10 |
| Length | 132mm |
| Head Width | 17mm |
A high-performance industrial component, this M10 x 132mm Nylon Hex Head Cap Screw features a nominal diameter of M10 and a total length of 132mm. The hex head has a manufactured width of 17mm, ensuring compatibility with standard tooling. Constructed from high-grade nylon, it exhibits excellent chemical resistance to a wide range of acids, bases, and solvents. Its non-conductive nature makes it ideal for electrical applications, preventing short circuits. The material's inherent flexibility also offers vibration dampening capabilities and reduces the risk of over-tightening damage. This makes it suitable for applications requiring precise torque control and resistance to environmental degradation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate 17mm hex tool. 2. Insert the M10 thread into the pre-tapped hole or nut. 3. Tighten incrementally, applying even pressure until the desired snugness is achieved, avoiding excessive force that could strip the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive torque, leading to thread stripping or head fracture. | Use a torque wrench set to the recommended limit for nylon fasteners or tighten to a snug feel, avoiding over-tightening. |
| Using metal tools that can damage the nylon head or threads. | Always use tools specifically designed for nylon or plastic fasteners, or ensure metal tools are in good condition and used with care. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Chemical processing equipment, Marine and coastal applications, Food processing machinery, Corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||