This M10 x 126mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and a lightweight profile, making it ideal for demanding environments where traditional metal fasteners fail. Its robust nylon construction ensures durability and non-conductivity.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M10 |
| Length | 126mm |
| Head Width | 21mm |
Engineered for reliability and performance, this M10 x 126mm Hex Head Cap Screw is manufactured from high-grade Nylon, offering superior dielectric strength and resistance to a wide range of chemicals and solvents. The M10 thread size provides robust engagement, while the 126mm length allows for fastening through substantial material thicknesses. The 21mm hex head width ensures compatibility with standard tools for secure installation. Its non-magnetic properties and low coefficient of friction make it suitable for sensitive electronic assemblies and environments prone to galvanic corrosion. Operating temperature range is -40°C to 120°C.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the nylon cap screw to confirm proper alignment and avoid cross-threading. 3. Using a standard wrench on the 21mm hex head, tighten the screw to the required torque, avoiding over-tightening to prevent stripping. 4. Verify secure engagement and the absence of thread damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nylon screws, leading to thread stripping or head deformation. | Use a torque wrench to apply the recommended torque specification for nylon fasteners, or tighten until snug and then a quarter turn further. Avoid excessive force. |
| Using nylon screws in high-load or high-temperature applications beyond their material limits. | Consult material data sheets and application requirements to ensure the nylon screw's tensile strength and temperature resistance are adequate for the intended use. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and panel mounting, Automotive and marine components (non-critical), Lightweight structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||