Engineered for extreme environments, this M10 x 116mm Grade 5 Titanium Hex Cap Screw offers superior strength-to-weight ratio and exceptional corrosion resistance. Ideal for critical fastening in aerospace, medical, and marine industries.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M10 |
| Length | 116mm |
| Head Width | 20mm |
Trusted by engineers across multiple sectors, this Hex Head Cap Screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), a dual-phase alloy renowned for its excellent mechanical properties and biocompatibility. Its M10 nominal diameter, 116mm length, and a 20mm hex head width facilitate secure and efficient torque application. This material exhibits a high tensile strength of approximately 950 MPa and a yield strength of 880 MPa, while maintaining a low density of 4.43 g/cm³. Its inherent resistance to chloride environments makes it indispensable in corrosive settings. This specific configuration is engineered for applications demanding high performance and reliability where weight reduction is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Apply a suitable anti-seize compound if required by the application environment. 3. Tighten the screw to the manufacturer's recommended torque specification using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing the screw, which can lead to thread stripping or material fatigue. | Always consult torque charts for Titanium Grade 5 fasteners and use a calibrated torque wrench for precise application. |
| Using incompatible lubricants or thread lockers that can compromise the titanium's integrity or bonding properties. | Utilize lubricants and thread lockers specifically designed for use with titanium alloys to prevent galling and ensure proper adhesion. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive and marine applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||