This M10 x 116mm Hex Head Cap Screw is engineered from high-grade carbon steel, offering exceptional tensile strength and durability. Designed for robust and reliable fastening in demanding industrial environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M10 |
| Length | 116mm |
| Head Width | 9mm |
A high-performance industrial component, this M10 x 116mm hex head cap screw is manufactured from hardened carbon steel, typically grade 8.8 or higher, providing superior tensile and shear strength. The M10 nominal diameter and 116mm length make it suitable for substantial load-bearing applications. Its precise metric thread form ensures secure engagement with corresponding tapped holes or nuts. The 9mm head width facilitates ample torque application with standard hex tooling, guaranteeing a reliable and secure joint in structural assemblies, machinery, and equipment manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads (nut or tapped hole) are clean and free from debris. 2. Hand-thread the screw to confirm proper alignment and avoid cross-threading. 3. Using an appropriately sized hex socket or wrench, tighten the screw to the specified torque value for the application and material grade.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect torque values, leading to under- or over-tightening. | Consult engineering drawings or torque charts for the precise recommended torque based on the screw's grade and application. |
| Cross-threading the screw due to misalignment during installation. | Always start threading by hand to ensure smooth engagement and proper alignment before applying any tools. |
A: This Hex Head Cap Screw, Carbon Steel is manufactured from Carbon Steel.
A: Structural steel framing and connections, Heavy machinery and equipment assembly, Automotive and transportation components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||