Precisely manufactured M10 x 10mm brass hex head cap screws. Offering excellent corrosion resistance and aesthetic appeal, these fasteners are suitable for demanding environments and visual applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M10 |
| Length | 10mm |
| Head Width | 14mm |
Specified by design engineers worldwide, these M10 x 10mm brass hex head cap screws feature a nominal diameter of 10mm and a grip length of 10mm, with a head width across flats of 14mm. Crafted from high-grade brass (typically UNS C26000 or similar), they exhibit superior corrosion resistance, particularly in marine and humid environments, and possess non-magnetic properties. Their inherent electrical conductivity makes them suitable for certain electrical grounding or bonding applications. The hex drive ensures reliable torque transfer for secure fastening in a wide array of assembly tasks.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M10 hex socket or wrench. 2. Align the screw with the pre-drilled or tapped hole. 3. Engage the hex socket and turn clockwise to tighten. 4. Torque to the manufacturer's recommended specification for the mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening brass screws, which can lead to thread stripping or deformation of the head. | Utilize a torque wrench and adhere to the recommended torque values for brass fasteners and the specific application. |
| Using steel fasteners in corrosive environments where brass is specified for its resistance. | Always verify material compatibility with the environmental conditions and the materials being joined; select brass for its proven corrosion resistance. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical connectors and grounding, Decorative trim and fixtures, Corrosion-resistant assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||