Engineered for demanding environments, this M10 x 108mm Nylon Hex Head Cap Screw provides exceptional corrosion resistance and dielectric strength. Ideal for applications where metal fasteners are unsuitable due to galvanic corrosion or electrical conductivity.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M10 |
| Length | 108mm |
| Head Width | 28mm |
Specified by design engineers worldwide, this M10 x 108mm Nylon Hex Head Cap Screw (M10 thread diameter, 108mm length) features a 28mm hex head width. Manufactured from high-performance Nylon 6/6, it offers superior tensile strength, impact resistance, and a broad operating temperature range. Its inherent non-conductive properties make it an ideal choice for electrical assemblies, medical equipment, and corrosive chemical environments where metal alternatives would compromise integrity or safety. The precise manufacturing ensures consistent thread engagement and reliable fastening.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-tighten the screw to verify thread engagement. 3. Use an appropriately sized wrench or socket to tighten the hex head to the required torque, avoiding over-tightening which can strip the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to stripped threads. | Use a torque wrench set to the manufacturer's recommended specification for nylon fasteners, or tighten with moderate hand pressure. |
| Using metal washers that can concentrate stress and damage the nylon head. | Utilize nylon or other plastic washers to distribute load evenly across the screw head. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Medical device assembly, Chemical processing equipment, Corrosion-prone environments, Lightweight structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||