Engineered for superior performance in corrosive and electrically sensitive applications, this M10 x 103mm Nylon Hex Head Cap Screw offers exceptional dielectric strength and chemical resistance for secure, non-conductive fastening.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M10 |
| Length | 103mm |
| Head Width | 34mm |
Designed for demanding industrial environments, this M10 x 103mm Hex Head Cap Screw is manufactured from high-performance nylon, providing excellent resistance to a wide range of chemicals, solvents, and moisture. Its lightweight, non-magnetic, and non-conductive properties make it ideal for applications where electrical isolation or EMI/RFI shielding is critical. The robust hex head, with a nominal width of 34mm, ensures reliable torque transfer for secure assembly, while the M10 thread and 103mm length offer significant clamping and structural capabilities in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-thread the screw to engage the threads properly, preventing cross-threading. 3. Tighten the screw using an appropriate wrench on the hex head to the required torque specification, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Cross-threading the nylon screw during initial engagement. | Always hand-thread the screw for the first few turns to ensure proper alignment and prevent damage to the nylon threads. |
| Applying excessive torque, leading to stripping of nylon threads or head deformation. | Use a torque wrench and adhere to the recommended torque values for nylon fasteners to prevent damage. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment mounting, Chemical processing and handling systems, Medical device assembly.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||