This high-quality lubricating polycarbonate stock sheet offers exceptional wear resistance and a low coefficient of friction. Its robust nature makes it ideal for demanding industrial applications requiring smooth operation and reduced wear.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.362" |
| Length | 23" |
| Width | 37" |
Engineered for reliability and performance, this 0.362-inch thick polycarbonate stock sheet boasts dimensions of 23 inches by 37 inches. Its inherent lubricity, achieved through proprietary material formulation, minimizes friction and enhances sliding capabilities. This material exhibits excellent impact strength, chemical resistance, and dimensional stability, making it suitable for a wide range of dynamic components, wear strips, guide rails, and bearing surfaces in automated machinery, material handling systems, and packaging equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free from debris. 2. Cut the polycarbonate sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the polycarbonate component using appropriate hardware, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard polycarbonate where lubricity is required. | Specify and use lubricating polycarbonate stock sheets for low-friction applications to prevent premature wear. |
| Improperly cleaning mating surfaces before installation. | Thoroughly clean both the polycarbonate surface and the mating surface to ensure optimal contact and minimize potential abrasion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction wear strips and guides, Slide bearings and bushings, Conveyor components and rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||