This high-quality lubricating nylon stock sheet provides exceptional wear resistance and self-lubricating properties. Ideal for fabricating custom components requiring reduced friction and extended service life in demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.423" |
| Length | 28" |
| Width | 13" |
Manufactured under strict quality controls, this lubricating nylon stock sheet exhibits a precise thickness of 0.423 inches, with dimensions of 28 inches in length and 13 inches in width. Its inherent low coefficient of friction and excellent abrasion resistance make it suitable for applications involving sliding or rotational movement where traditional lubrication is impractical or undesirable. The material's toughness and chemical resistance further enhance its suitability for various industrial settings, ensuring reliable performance and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the nylon stock sheet to the required dimensions using appropriate tooling. 2. Machine or form the cut piece to the final component shape, adhering to design specifications. 3. Install the fabricated component, ensuring proper fitment and alignment within the machinery.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for nylon, leading to chipping or melting. | Utilize sharp, carbide-tipped cutting tools designed for plastics, employing appropriate feed rates and cooling to prevent heat buildup. |
| Over-tightening fasteners, which can cause deformation or cracking of the nylon component. | Apply fasteners with controlled torque, using washers to distribute load and prevent localized stress concentrations. Consider using threaded inserts if repeated assembly/disassembly is required. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Gears and sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||