This industrial O-ring features a Viton elastomer for superior chemical and temperature resistance, reinforced with a Nylon jacket for enhanced structural integrity and extrusion resistance in high-pressure systems.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 9.784" |
| Outside Diameter | 2.069" |
| Cross Section | 0.132" |
Precision-manufactured to tight tolerances, this Viton O-ring boasts an Inside Diameter of 9.784 inches, an Outside Diameter of 2.069 inches, and a Cross Section of 0.132 inches. The core Viton material provides exceptional resistance to a broad spectrum of chemicals, aggressive fuels, oils, and extreme temperatures ranging from -20°F to 400°F (-29°C to 204°C). The integrated Nylon reinforcement significantly boosts its mechanical strength, preventing extrusion and damage in high-pressure environments, making it ideal for dynamic and static sealing in demanding industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and absence of debris. 2. Carefully lubricate the O-ring and the groove with a compatible lubricant. 3. Gently install the O-ring into the designated groove, ensuring it is seated without twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply moderate, controlled pressure and utilize appropriate tooling if necessary to avoid stressing the O-ring. |
| Selecting an O-ring material not resistant to the operating fluid or temperature. | Always verify the chemical compatibility and temperature range of the O-ring material against the specific application conditions. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Hydraulic systems, Fuel injection systems, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||