This industrial O-ring, constructed with resilient Viton and a robust carbon steel core, offers superior sealing in extreme environments. Engineered for critical applications requiring high chemical and temperature resistance.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 8.523" |
| Outside Diameter | 3.389" |
| Cross Section | 0.141" |
Engineered for reliability and performance, this industrial O-ring boasts an Inside Diameter (ID) of 8.523 inches and an Outside Diameter (OD) of 3.389 inches, with a precise Cross Section (CS) of 0.141 inches. The Viton compound provides exceptional resistance to a wide range of chemicals, oils, fuels, and high temperatures, while the carbon steel core offers structural integrity and enhanced pressure handling capabilities. This combination ensures a durable and dependable seal in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and damage. 2. Carefully stretch the O-ring over the shaft or into the groove, avoiding overstretching or sharp tools. 3. Ensure the O-ring is properly seated and not twisted before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or cuts on the O-ring surface. | Apply gentle, even pressure. Utilize appropriate installation tools if necessary, ensuring they are smooth and free of sharp edges. |
| Installing a twisted or improperly seated O-ring, compromising the seal integrity. | Verify that the O-ring lies flat and is fully seated within its groove without any twists or kinks before mating components. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Hydraulic systems, Chemical processing equipment, High-temperature fluid power systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||