This industrial Viton O-ring, featuring a brass material composition, is engineered for superior sealing in high-demand environments. Its precise dimensions ensure optimal performance and reliability in critical applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.554" |
| Outside Diameter | 7.137" |
| Cross Section | 0.195" |
Specified by design engineers worldwide, this industrial O-ring is constructed from premium Viton (Fluorocarbon elastomer) renowned for its exceptional resistance to a wide array of chemicals, fuels, oils, and extreme temperatures ranging from -20°F to +400°F (-29°C to +204°C). The integrated brass component offers excellent corrosion resistance and galvanic compatibility in specific fluid systems. With an Inside Diameter of 3.554 inches, an Outside Diameter of 7.137 inches, and a Cross Section of 0.195 inches, this O-ring meets stringent industry standards for dynamic and static sealing applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and O-ring are clean and free of debris. 2. Carefully lubricate the O-ring with a compatible lubricant, if recommended for the application. 3. Gently install the O-ring into its designated groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or tears. | Handle the O-ring with care and use appropriate installation tools to avoid damage. |
| Incorrect O-ring size selection for the groove dimensions. | Always verify O-ring dimensions against the groove specifications before installation. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Automotive fuel systems, Aerospace hydraulic systems, Chemical processing equipment, Industrial pump and valve seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||