This industrial O-ring, crafted from durable Viton with a carbon steel backing, ensures robust sealing in demanding environments. Its precise dimensions guarantee a secure fit for critical applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 9.719" |
| Outside Diameter | 7.790" |
| Cross Section | 0.166" |
Manufactured under strict quality controls, this industrial O-ring features an inside diameter of 9.719 inches and an outside diameter of 7.790 inches, with a precise 0.166-inch cross-section. The Viton material offers exceptional resistance to high temperatures, aggressive chemicals, and fuels, making it ideal for seals in pumps, valves, and hydraulic systems. The carbon steel component provides enhanced structural integrity and resistance to compression set, ensuring long-term sealing performance under extreme operational pressures and temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean and free from debris. 2. Carefully place the O-ring into its designated groove, ensuring it sits flush. 3. Apply a thin, compatible lubricant if necessary to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or stretching the O-ring during installation. | Install the O-ring without excessive tension. Allow it to seat naturally within its groove. |
| Using incompatible lubricants or cleaning agents that degrade Viton. | Consult the material compatibility chart for Viton and select only approved lubricants and cleaning agents. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Hydraulic Systems, Fuel Systems, Chemical Processing Equipment, High-Temperature Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||