This industrial-grade Viton O-ring, precisely machined from Aluminum 6061, offers exceptional sealing performance. Its robust construction ensures reliability in extreme temperatures and aggressive chemical applications.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 8.900" |
| Outside Diameter | 5.317" |
| Cross Section | 0.200" |
Specified by design engineers worldwide, this high-performance industrial O-ring features an Inside Diameter (ID) of 8.900 inches and an Outside Diameter (OD) of 5.317 inches, with a precise Cross Section (CS) of 0.200 inches. The substrate material, Aluminum 6061, provides excellent machinability and corrosion resistance, making it suitable for environments where chemical compatibility and structural integrity are paramount. This combination ensures a tight, dependable seal against leakage in critical fluid and gas systems, maintaining operational efficiency and safety across a broad temperature range.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free of debris or damage. 2. Carefully inspect the O-ring for any nicks, cuts, or imperfections. 3. Gently compress and seat the O-ring into its groove, ensuring it lies flat and is not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong O-ring size for the groove. | Always verify the O-ring dimensions against the groove dimensions to ensure proper fit and compression. |
| Overtightening fasteners, leading to O-ring extrusion or damage. | Tighten fasteners to the manufacturer's recommended torque specifications to achieve adequate sealing without deforming the O-ring. |
A: This Industrial O-Ring, Viton is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic equipment, Chemical processing plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||