Engineered for extreme environments, this industrial O-ring features a robust Viton elastomer encapsulated within a 304 stainless steel housing. It provides exceptional chemical resistance and high-temperature stability for critical sealing applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 9.385" |
| Outside Diameter | 6.388" |
| Cross Section | 0.139" |
A proven choice for industrial professionals, this Viton O-ring is designed for superior sealing performance under challenging conditions. Its precise dimensions—an inside diameter of 9.385 inches, an outside diameter of 6.388 inches, and a cross-section of 0.139 inches—ensure a tight, reliable seal. The Viton material offers excellent resistance to a wide range of chemicals, oils, and solvents, while the 304 stainless steel construction provides robust mechanical integrity and corrosion resistance, making it suitable for aggressive media and elevated temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris or sharp edges. 2. Carefully position the O-ring into its designated groove, ensuring it is not twisted or pinched. 3. Apply a light, compatible lubricant to the O-ring and mating surface if necessary to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle pressure and use appropriate tools to avoid stretching, cutting, or pinching the O-ring. |
| Incorrect O-ring size selection for the groove dimensions. | Always verify the O-ring's inside diameter, outside diameter, and cross-section against the groove specifications before installation. |
A: This Industrial O-Ring, Viton is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, Automotive fuel systems, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||