Engineered for extreme conditions, this industrial Viton O-ring provides reliable sealing in aggressive chemical and high-temperature environments. Its precise dimensions ensure a perfect fit for critical applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 7.550" |
| Outside Diameter | 7.570" |
| Cross Section | 0.241" |
A proven choice for industrial professionals, this Viton O-ring (Fluoroelastomer) offers exceptional resistance to a wide range of chemicals, fuels, oils, and extreme temperatures (typically -20°F to +400°F). With an inside diameter of 7.550 inches, an outside diameter of 7.570 inches, and a precise 0.241-inch cross-section, it is designed for high-integrity sealing in demanding fluid power systems, chemical processing equipment, and automotive applications where performance and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from debris. 2. Lightly lubricate the O-ring and groove with a compatible lubricant to prevent tearing during installation. 3. Carefully install the O-ring into the groove, avoiding any stretching or twisting that could compromise its seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle pressure and use appropriate tools if necessary to avoid stretching or nicking the O-ring. |
| Installing into a contaminated or damaged groove. | Thoroughly inspect and clean the groove before O-ring installation to guarantee a proper seal. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Chemical Processing Equipment, Automotive Fuel Systems, Hydraulic and Pneumatic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||