This industrial O-ring features superior chemical and temperature resistance due to its Viton material. Engineered from Aluminum 6061 for durability, it ensures reliable sealing in challenging environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 5.435" |
| Outside Diameter | 5.673" |
| Cross Section | 0.130" |
Precision-manufactured to tight tolerances, this Viton O-ring boasts an Inside Diameter of 5.435 inches, an Outside Diameter of 5.673 inches, and a Cross Section of 0.130 inches. The inherent properties of Viton (FKM) provide excellent resistance to a wide range of chemicals, fuels, oils, and high temperatures, making it ideal for static and dynamic sealing applications. The Aluminum 6061 base offers good corrosion resistance and structural integrity, suitable for moderate pressure and temperature excursions within its material limits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free of debris. 2. Carefully install the O-ring into the groove, avoiding overstretching or twisting. 3. Verify proper seating and compression for optimal sealing performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing excessive compression and premature failure. | Follow specified torque values and ensure even pressure distribution. |
| Using incompatible cleaning agents that degrade the Viton material. | Refer to chemical compatibility charts and use approved lubricants/cleaners. |
A: This Industrial O-Ring, Viton is manufactured from Aluminum 6061.
A: Chemical processing equipment, Automotive fuel systems, Aerospace fluid power.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||