Engineered for extreme environments, this industrial Viton O-Ring provides robust sealing performance. Its exceptional material properties ensure reliability in high-temperature and chemically aggressive conditions.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 3.737" |
| Outside Diameter | 1.902" |
| Cross Section | 0.133" |
Purpose-built for heavy-duty applications, this Viton O-Ring features an internal diameter of 3.737 inches, an external diameter of 1.902 inches, and a cross-sectional diameter of 0.133 inches. Constructed from high-performance Viton, it offers outstanding resistance to a broad spectrum of chemicals, fuels, oils, and extreme temperatures ranging from -20°F to 400°F (-29°C to 204°C). The carbon steel housing provides structural integrity and enhanced durability for critical sealing points in demanding industrial machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully position the O-ring within its designated groove, avoiding any stretching or twisting. 3. Apply a light lubricant compatible with Viton if necessary to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Stretching the O-ring during installation. | Always install the O-ring without excessive tension. If the O-ring is slightly smaller than the groove circumference, it can be gently worked into place to avoid deformation. |
| Using incompatible lubricants or cleaning agents. | Only use lubricants and cleaning agents specifically rated for compatibility with Viton to prevent material degradation and seal failure. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Automotive Fuel Systems, Chemical Processing Equipment, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||