This industrial-grade Viton O-ring provides exceptional sealing performance in harsh environments. Engineered for superior resistance to chemicals, fuels, and high temperatures, ensuring reliable operation and extended service life in critical systems.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 9.841" |
| Outside Diameter | 7.050" |
| Cross Section | 0.217" |
Manufactured under strict quality controls, this Viton O-ring features a precise inside diameter of 9.841 inches, an outside diameter of 7.050 inches, and a cross-section of 0.217 inches. Viton (FKM) offers outstanding resistance to a wide array of aggressive chemicals, fuels, oils, and extreme temperatures ranging from -20°F to 400°F (-29°C to 204°C). Its inherent low gas permeability and excellent compression set further enhance its sealing integrity in demanding applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and within specified dimensional tolerances. 2. Lightly lubricate the O-ring with a compatible lubricant to prevent damage during installation. 3. Carefully install the O-ring into the groove, ensuring it is seated properly and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring nicks or tears. | Apply gentle, even pressure and utilize appropriate installation tools if necessary. Ensure the O-ring is not stretched beyond its elastic limit. |
| Incorrect O-ring material selection for the operating environment, resulting in premature failure. | Verify the chemical compatibility and temperature range of the Viton material against the specific application media and operating conditions. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Automotive Fuel Systems, Aerospace Hydraulic Systems, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||