This industrial-grade Viton O-ring, featuring a durable carbon steel construction, provides superior sealing in demanding environments. Engineered for exceptional resistance to heat and aggressive chemicals.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.350" |
| Outside Diameter | 9.200" |
| Cross Section | 0.182" |
Engineered for reliability and performance, this industrial O-ring is fabricated from high-quality Viton, renowned for its exceptional resistance to high temperatures (up to 400°F/204°C) and a wide spectrum of chemicals, oils, and solvents. The robust carbon steel construction ensures structural integrity and longevity under extreme pressure and thermal cycling. With a precise Inside Diameter of 1.350", an Outside Diameter of 9.200", and a Cross Section of 0.182", this O-ring guarantees a tight, leak-proof seal in critical industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean mating surfaces and the O-ring groove. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring, ensuring it is seated properly and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade the Viton material. | Always use a lubricant recommended for Viton and the specific application environment. |
| Twisting or deforming the O-ring during installation. | Install the O-ring straight into the groove, avoiding excessive stretching or twisting. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Automotive fuel systems, Aerospace hydraulic systems, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||