This industrial O-ring, crafted from durable 304 stainless steel, offers superior sealing capabilities in challenging operational conditions. Its silicone elastomer ensures excellent flexibility and resilience.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 2.118" |
| Outside Diameter | 10.097" |
| Cross Section | 0.267" |
Designed for demanding industrial environments, this O-ring boasts a precise Inside Diameter of 2.118 inches, an Outside Diameter of 10.097 inches, and a robust Cross Section of 0.267 inches. The 304 stainless steel construction provides exceptional corrosion resistance and mechanical strength, making it suitable for a wide range of chemical exposures and temperature variations. Its silicone material offers excellent thermal stability, flexibility across a broad temperature range, and resistance to UV and ozone degradation, ensuring reliable sealing in applications such as fluid power systems, chemical processing equipment, and high-temperature sealing solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from burrs or debris. 2. Carefully insert the O-ring into the groove, avoiding stretching or twisting. 3. Verify proper seating and compression of the O-ring before assembling mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently guide the O-ring into the groove, using minimal tension to prevent permanent deformation and premature failure. |
| Installing the O-ring into a contaminated or damaged groove. | Thoroughly clean and inspect the groove for any imperfections or foreign matter before installation to ensure a proper seal. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Hydraulic and Pneumatic Systems, Chemical Processing Equipment, Automotive and Aerospace Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||