This industrial silicone O-ring, designed for robust sealing in challenging environments, features a brass construction for enhanced conductivity and durability. Its precise dimensions ensure a reliable seal in critical fluid and gas transfer systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 7.460" |
| Outside Diameter | 1.314" |
| Cross Section | 0.113" |
Precision-manufactured to tight tolerances, this industrial O-ring boasts an Inside Diameter of 7.460 inches, an Outside Diameter of 1.314 inches, and a cross-section of 0.113 inches. Constructed from high-grade silicone with a brass component, it offers excellent resistance to extreme temperatures, chemicals, and UV radiation, making it ideal for applications requiring both reliable sealing and electrical conductivity. The brass element provides enhanced mechanical strength and corrosion resistance, ensuring longevity in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean and free from debris. 2. Carefully position the O-ring within its designated groove, avoiding any stretching or twisting. 3. Apply a thin layer of compatible lubricant if recommended for the specific application to facilitate seating and prevent damage during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Always install the O-ring without excessive stretching, allowing it to seat naturally in the groove. |
| Using incompatible lubricants that can degrade the silicone material. | Refer to the material compatibility chart for approved lubricants for silicone and brass. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Chemical processing equipment, Aerospace fluid systems, Medical device assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||