This industrial-grade silicone O-ring provides reliable sealing in challenging environments. Its robust design and material properties ensure effective containment across a wide temperature range.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 9.935" |
| Outside Diameter | 5.289" |
| Cross Section | 0.086" |
Specified by design engineers worldwide, this carbon steel industrial O-ring, identified by part number [Insert Part Number Here], exhibits precise dimensions crucial for leak-proof sealing. With an inside diameter of 9.935 inches and an outside diameter of 5.289 inches, its 0.086-inch cross-section ensures a tight fit within mating grooves. The carbon steel construction offers exceptional mechanical strength and rigidity, making it suitable for high-pressure systems and applications where deformation under load is a concern. This material also provides good resistance to abrasion and impact.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated. 2. Carefully stretch the O-ring over the smaller component or into the groove, avoiding excessive force. 3. Verify the O-ring is seated evenly and without twists within its designated channel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a dry O-ring, leading to friction and potential damage. | Always lubricate the O-ring and mating surfaces with a compatible lubricant before installation. |
| Twisting or rolling the O-ring during installation, compromising its sealing integrity. | Gently guide the O-ring into the groove, ensuring it lies flat and evenly without any rotational stress. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: High-pressure hydraulic systems, Automotive engine sealing, Industrial pump and valve assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||