This industrial O-ring features a robust carbon steel core with a high-performance silicone elastomer sealing surface. Engineered for reliability in challenging environments, it provides exceptional sealing integrity.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 9.930" |
| Outside Diameter | 1.275" |
| Cross Section | 0.215" |
Manufactured under strict quality controls, this industrial O-ring boasts a precise Inside Diameter of 9.930 inches, an Outside Diameter of 1.275 inches, and a Cross Section of 0.215 inches. The carbon steel core offers superior mechanical strength and rigidity, preventing extrusion under high pressure and temperature. The silicone elastomer provides excellent resistance to a wide range of chemicals, extreme temperatures (-60°C to +230°C), and UV radiation, making it ideal for static and dynamic sealing in food processing, medical equipment, and general industrial fluid handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of debris. 2. Carefully inspect the O-ring for any damage. 3. Gently install the O-ring into the groove, avoiding stretching or twisting. 4. Verify proper seating and compression before assembling mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Install the O-ring without excessive tension to prevent premature failure and leakage. |
| Using the wrong O-ring size for the groove. | Always verify the O-ring dimensions (ID, OD, CS) match the specified groove dimensions for optimal sealing. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: High-temperature fluid containment, Medical device seals, Food and beverage processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||