This industrial O-ring, crafted from durable Aluminum 6061, offers exceptional sealing performance. Engineered for demanding environments, it provides reliable fluid and gas containment across a wide temperature range.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 0.320" |
| Outside Diameter | 10.404" |
| Cross Section | 0.151" |
Specified by design engineers worldwide, this industrial O-ring is precision-machined from robust Aluminum 6061 alloy, renowned for its excellent corrosion resistance and moderate strength. The precise dimensions, with an Inside Diameter of 0.320 inches, an Outside Diameter of 10.404 inches, and a Cross Section of 0.151 inches, ensure a tight, leak-proof seal in critical systems. This material is ideal for applications requiring a balance of mechanical integrity and chemical inertness, suitable for moderate temperature and pressure conditions where metal sealing is preferred over elastomeric solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both the groove and the O-ring to remove any debris or lubricant. 2. Carefully install the O-ring into the designated groove, ensuring it is seated evenly without twisting. 3. Verify the O-ring is properly positioned before assembling mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a dirty O-ring or groove. | Always clean both the O-ring and the mating groove thoroughly before installation to prevent seal compromise and leaks. |
| Twisting or overstretching the O-ring during installation. | Gently guide the O-ring into the groove, avoiding any stretching or twisting which can lead to premature failure and leakage. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Hydraulic and pneumatic systems, Fluid transfer lines, Engine and machinery seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||