This high-performance industrial O-ring, constructed from resilient silicone, is designed for superior sealing in challenging environments. Its robust 304 stainless steel core ensures exceptional structural integrity and chemical resistance.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 9.863" |
| Outside Diameter | 6.514" |
| Cross Section | 0.227" |
Engineered for reliability and performance, this industrial O-ring features an inside diameter of 9.863 inches, an outside diameter of 6.514 inches, and a precise 0.227-inch cross-section. The core material is high-grade 304 stainless steel, offering excellent corrosion resistance, thermal stability across a wide temperature range (-60°C to +230°C), and compatibility with many chemicals and solvents. This combination provides a robust and long-lasting seal for critical fluid and gas containment systems in industries such as food processing, pharmaceuticals, and chemical manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch and place the O-ring into the groove, avoiding excessive twisting or stretching beyond its elastic limit. 3. Ensure the O-ring is seated evenly and flush within the groove before assembling the mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to cuts or tears in the O-ring. | Employ gentle stretching and manipulation. If resistance is met, re-evaluate the groove dimensions and lubrication. |
| Installing a dry O-ring, which can cause friction damage and premature failure. | Always apply a light, compatible lubricant to the O-ring and groove prior to installation to reduce friction. |
| Using an O-ring with incorrect dimensions for the application's groove. | Verify the O-ring's inside diameter, outside diameter, and cross-section match the precise specifications of the groove design. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: High-temperature fluid sealing, Chemical processing equipment, Pharmaceutical and food-grade applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||