Engineered for superior sealing performance in critical industrial environments. This high-grade Silicone O-ring offers exceptional resilience and durability, ensuring reliable containment across a wide range of temperatures and chemical exposures.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 9.632" |
| Outside Diameter | 7.562" |
| Cross Section | 0.234" |
Precision-manufactured to tight tolerances, this industrial O-ring boasts an Inside Diameter of 9.632 inches, an Outside Diameter of 7.562 inches, and a Cross Section of 0.234 inches. Constructed from high-purity silicone, it exhibits outstanding resistance to extreme temperatures (typically -60°C to +200°C), ozone, UV radiation, and a broad spectrum of chemicals, making it ideal for food-grade, medical, and high-temperature applications where standard elastomers may degrade. Its inherent flexibility and excellent compression set resistance ensure long-term sealing integrity in static and dynamic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the mating groove and sealing surfaces for cleanliness and absence of damage. 2. Lightly lubricate the O-ring and groove with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring into the groove, ensuring it sits flush and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the gland, causing excessive compression and premature failure. | Adhere strictly to recommended gland design and compression specifications to avoid overstressing the O-ring. |
| Using incompatible lubricants or cleaning agents that degrade the silicone material. | Always consult material compatibility charts and use only lubricants and cleaning agents specifically approved for silicone elastomers. |
| Installing the O-ring with a twist or pinch, leading to immediate leakage and reduced service life. | Ensure the O-ring is seated evenly and without distortion during installation. Proper lubrication can aid in smooth installation. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Food and Beverage Processing Equipment, Medical Devices and Pharmaceutical Manufacturing, High-Temperature Fluid Power Systems, Aerospace and Automotive Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||