This industrial-grade silicone O-ring, featuring a brass reinforcement, offers superior sealing capabilities in demanding environments. Its robust construction ensures reliable performance and longevity across a wide range of applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 9.598" |
| Outside Diameter | 7.898" |
| Cross Section | 0.072" |
Trusted by engineers across multiple sectors, this brass-reinforced silicone O-ring is engineered for exceptional performance. With an inside diameter of 9.598 inches, an outside diameter of 7.898 inches, and a precise 0.072-inch cross-section, it provides a secure seal. The silicone material offers excellent flexibility, high-temperature resistance up to 230°C (446°F), and good resilience to weathering and ozone. The integrated brass element enhances structural integrity and compression set resistance, making it suitable for applications requiring enhanced durability and stability under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force. 3. Seat the O-ring fully within the groove, ensuring no twists or distortions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtensioning during installation, leading to permanent deformation. | Apply gentle, even pressure when stretching the O-ring, and use appropriate tooling if necessary. |
| Installing a twisted or kinked O-ring, compromising the seal. | Visually inspect the O-ring for straightness before and during installation, ensuring it sits flush in the groove. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Aerospace fluid systems, High-temperature industrial machinery, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||