This industrial-grade Silicone O-Ring, constructed from durable carbon steel, ensures reliable sealing in challenging conditions. Its precise dimensions provide a secure fit, preventing leaks and contamination in critical applications.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 2.136" |
| Outside Diameter | 7.444" |
| Cross Section | 0.120" |
Designed for demanding industrial environments, this Silicone O-Ring boasts a 2.136" inside diameter, 7.444" outside diameter, and a 0.120" cross-section. The carbon steel material offers superior strength, corrosion resistance, and thermal stability, making it ideal for high-pressure and extreme temperature applications. Its inherent flexibility and resilience ensure a tight, long-lasting seal against chemicals, oils, and gasses, crucial for maintaining operational integrity in manufacturing, automotive, and chemical processing sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully stretch the O-ring over the shaft or into the groove, avoiding overstretching. 3. Seat the O-ring firmly to achieve uniform compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation, leading to premature failure. | Install the O-ring by carefully working it into its groove or over the component, using minimal force and avoiding excessive elongation. |
| Installing with a dirty or damaged groove, compromising the seal's effectiveness. | Thoroughly inspect and clean the sealing groove, removing any burrs, nicks, or contaminants before proceeding with installation. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: High-pressure hydraulic systems, Automotive engine components, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||