This industrial silicone O-ring provides reliable sealing in demanding applications. Engineered for exceptional temperature resistance and chemical inertness, ensuring consistent performance and longevity.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 9.407" |
| Outside Diameter | 8.071" |
| Cross Section | 0.190" |
Precision-manufactured to tight tolerances, this industrial O-ring features an Inside Diameter of 9.407 inches, an Outside Diameter of 8.071 inches, and a Cross Section of 0.190 inches. Constructed from high-grade silicone, it exhibits excellent flexibility, resilience, and resistance to a wide range of temperatures from -55°C to +200°C. Its inherent properties make it ideal for static and dynamic sealing applications where resistance to oxidation, ozone, and certain chemicals is critical, preventing leaks in fluid and gas systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully stretch the O-ring over the component or into the groove, avoiding excessive force. 3. Verify the O-ring is seated properly and uniformly within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching during installation. | Gently flex and guide the O-ring into place to prevent permanent deformation. |
| Installing into a contaminated groove. | Thoroughly clean the groove with an appropriate solvent before O-ring installation. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Food and Beverage Processing, Medical Equipment, Automotive Seals, Aerospace Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||