This industrial O-ring features a durable Nylon jacket over a flexible Silicone core, providing exceptional sealing performance. Its precise dimensions ensure a reliable fit in critical applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 9.300" |
| Outside Diameter | 7.804" |
| Cross Section | 0.121" |
A high-performance industrial component, this O-ring is engineered with a Nylon outer jacket for enhanced abrasion and chemical resistance, encapsulating a resilient Silicone inner core. This hybrid construction delivers superior sealing capabilities across a wide temperature range, from -60°C to +200°C. The specified dimensions – an Inside Diameter of 9.300 inches, an Outside Diameter of 7.804 inches, and a Cross Section of 0.121 inches – are maintained with tight tolerances, ensuring consistent performance in dynamic and static sealing environments. Its material composition makes it suitable for applications involving food contact, medical devices, and high-purity processing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully insert the O-ring into its designated groove, ensuring it is not twisted. 3. Apply a light lubricant compatible with the O-ring material if necessary for assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the assembly, which can cause the O-ring to extrude or be permanently deformed. | Tighten fasteners to the recommended torque specifications for the application. |
| Using a lubricant that is incompatible with Silicone or Nylon, leading to material degradation. | Consult the material compatibility chart and use only approved lubricants. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Food and Beverage Processing Equipment, Medical Device Seals, Pharmaceutical Production, Aerospace Fluid Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||