This industrial-grade silicone O-ring, constructed from robust carbon steel, provides exceptional sealing performance. Its precise dimensions ensure a reliable fit in critical sealing applications, resisting extreme temperatures and chemical exposure.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 4.046" |
| Outside Diameter | 9.012" |
| Cross Section | 0.126" |
Manufactured under strict quality controls, this silicone O-ring features an inside diameter of 4.046 inches, an outside diameter of 9.012 inches, and a cross-section of 0.126 inches. The carbon steel housing offers enhanced structural integrity and resistance to deformation under pressure. Silicone's inherent flexibility and wide temperature range (-55°C to +230°C) make it suitable for applications requiring resilience against thermal cycling and a broad spectrum of chemicals, including oils, greases, and some solvents. Its low compression set ensures long-term sealing efficacy.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully position the O-ring within its designated groove, avoiding stretching or twisting. 3. Apply light, even pressure to seat the O-ring fully before assembling mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to excessive compression and premature failure. | Tighten fasteners to the manufacturer's recommended torque specifications to prevent over-compression. |
| Using excessive lubrication which can degrade the silicone material. | Utilize only compatible, low-volatility silicone lubricants sparingly, if required. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: High-temperature fluid systems, Chemical processing equipment, Automotive and aerospace sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||