This industrial-grade silicone O-ring offers exceptional sealing performance. Featuring a brass reinforcement for enhanced structural integrity, it's engineered for reliable operation in diverse industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 2.851" |
| Outside Diameter | 10.192" |
| Cross Section | 0.071" |
Precision-manufactured to tight tolerances, this silicone O-ring boasts an Inside Diameter of 2.851 inches, an Outside Diameter of 10.192 inches, and a precise Cross Section of 0.071 inches. The incorporation of brass within the silicone matrix provides superior rigidity and resistance to extrusion under high pressure. This material composition ensures excellent thermal stability, broad chemical resistance, and flexibility across a wide temperature range, making it ideal for critical sealing applications where seal integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Gently seat the O-ring within its designated groove, confirming uniform placement.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using sharp objects to force the O-ring into its groove, leading to nicks or tears. | Employ specialized O-ring installation tools or gently stretch the O-ring over the component to prevent damage. |
| Installing a damaged or improperly sized O-ring, resulting in leaks. | Visually inspect the O-ring for any defects before installation and verify it matches the groove dimensions precisely. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic and pneumatic systems, Automotive fluid sealing, High-temperature processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||