This robust industrial O-ring, crafted from high-grade silicone, offers exceptional sealing capabilities. Its precise dimensions ensure a secure fit in critical applications requiring reliability and durability.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 0.669" |
| Outside Diameter | 1.268" |
| Cross Section | 0.241" |
Engineered for reliability and performance, this industrial O-ring features an Inside Diameter (ID) of 0.669 inches, an Outside Diameter (OD) of 1.268 inches, and a Cross Section (CS) of 0.241 inches. The material, polycarbonate, provides excellent resistance to a wide range of chemicals, extreme temperatures (both high and low), and UV exposure, making it ideal for harsh environments. Its inherent flexibility and resilience ensure a tight, leak-proof seal under pressure. This O-ring is suitable for static and dynamic sealing applications in industries such as food processing, medical equipment, and general manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean and free from debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Gently seat the O-ring into its designated groove, verifying uniform compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or cuts. | Apply a thin film of compatible lubricant and use a non-metallic, rounded installation tool if necessary. |
| Incorrect O-ring size for the application, resulting in leaks or premature failure. | Always verify the groove dimensions and O-ring specifications before selecting and installing. |
A: This Industrial O-Ring, Silicone is manufactured from Polycarbonate.
A: Fluid and gas sealing in pumps and valves, Sealing in food and beverage processing equipment, Medical device sealing for biocompatibility.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||