This high-performance industrial O-ring features a robust Titanium Grade 5 core encapsulated in premium silicone. Engineered for exceptional sealing in demanding environments, it offers superior chemical resistance and temperature stability.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 3.980" |
| Outside Diameter | 7.065" |
| Cross Section | 0.203" |
Engineered for reliability and performance, this industrial O-ring boasts an inside diameter of 3.980 inches, an outside diameter of 7.065 inches, and a precise cross-section of 0.203 inches. The core material, Titanium Grade 5 (Ti-6Al-4V), provides exceptional strength-to-weight ratio, excellent corrosion resistance against a wide range of chemicals and saltwater, and maintains structural integrity across a broad temperature spectrum, from -100°F to +500°F. The silicone elastomer jacket offers superior flexibility, high tensile strength, and excellent resistance to ozone, UV, and weathering, making it suitable for aerospace, medical, and extreme industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and O-ring surfaces are clean and free from debris or damage. 2. Lubricate the O-ring and groove with a compatible lubricant (refer to material compatibility charts). 3. Carefully install the O-ring into the groove, avoiding stretching or twisting beyond its elastic limit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring extrusion or tearing. | Apply moderate, consistent pressure and utilize appropriate installation tools if necessary to prevent damage. |
| Incorrect lubricant selection, causing premature material degradation. | Always consult a chemical compatibility chart to select a lubricant that is compatible with both the silicone elastomer and the Titanium Grade 5 core. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: Aerospace fluid systems, High-pressure chemical processing, Cryogenic and high-temperature seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||