This industrial O-ring, crafted from robust carbon steel, ensures reliable sealing in critical applications. Its precise dimensions provide a secure fit, offering excellent resistance to extreme temperatures and chemicals.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 7.529" |
| Outside Diameter | 1.699" |
| Cross Section | 0.122" |
Specified by design engineers worldwide, this industrial O-ring is manufactured from high-grade carbon steel, offering superior strength and durability. The precise dimensions of a 7.529-inch inside diameter, 1.699-inch outside diameter, and a 0.122-inch cross-section ensure a precise fit and effective seal in demanding environments. This material selection provides excellent resistance to abrasion and mechanical stress, making it ideal for applications requiring robust sealing solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of any debris or damage. 2. Carefully place the O-ring into its designated groove, avoiding any stretching or twisting. 3. Assemble the components, ensuring even pressure distribution across the O-ring for a proper seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing the O-ring to be compressed beyond its elastic limit. | Tighten fasteners to the manufacturer's recommended torque specifications to prevent over-compression. |
| Using the wrong O-ring size for the groove, leading to leakage or premature failure. | Always verify the O-ring dimensions against the groove dimensions and application requirements before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: High-pressure hydraulic systems, Automotive engine components, Industrial machinery seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||