Engineered for extreme conditions, this industrial silicone O-ring features a 304 stainless steel construction, ensuring exceptional durability and chemical resistance for critical sealing applications. Optimal for high-temperature and corrosive environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 0.583" |
| Outside Diameter | 8.693" |
| Cross Section | 0.072" |
Specified by design engineers worldwide, this industrial O-ring is manufactured to precise tolerances for reliable sealing performance. The 304 stainless steel construction provides excellent corrosion resistance and high-temperature stability, making it ideal for demanding fluid power systems, chemical processing equipment, and aerospace applications. Key dimensions include an inside diameter of 0.583 inches, an outside diameter of 8.693 inches, and a precise cross-section of 0.072 inches, ensuring a secure and leak-free fit within designated grooves.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of burrs or foreign contaminants. 2. Carefully inspect the O-ring for any nicks, cuts, or defects prior to installation. 3. Gently stretch and place the O-ring into the groove, ensuring it lies flat and is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a twisted or pinched O-ring. | Carefully guide the O-ring into the groove, ensuring it seats evenly without twisting or stretching excessively. |
| Installing on a contaminated or damaged groove. | Thoroughly clean and inspect the groove for any debris, burrs, or imperfections that could compromise the seal. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: Hydraulic and Pneumatic Systems, Chemical Processing Equipment, Aerospace Fluid Connectors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||