Engineered for superior sealing performance, this industrial silicone O-ring features a robust 316 stainless steel construction. Its precise dimensions ensure a reliable, leak-proof seal in critical industrial environments.
| Standard | DIN 933 |
| Material | 316 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 9.027" |
| Outside Diameter | 7.022" |
| Cross Section | 0.233" |
A proven choice for industrial professionals, this silicone O-ring is designed for demanding applications requiring excellent chemical resistance and a wide operating temperature range. The integrated 316 stainless steel core provides enhanced structural integrity and resistance to deformation under pressure. With an Inside Diameter of 9.027 inches, an Outside Diameter of 7.022 inches, and a Cross Section of 0.233 inches, this O-ring offers exceptional sealing capabilities in fluid handling systems, chemical processing, and high-temperature environments where standard elastomers may fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully place the O-ring into the groove, ensuring it is not twisted or overstretched. 3. Apply even pressure during assembly to seat the O-ring properly, avoiding any sharp edges or pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to O-ring extrusion or permanent deformation. | Adhere to specified torque values for fasteners to prevent over-compression of the O-ring. |
| Using incompatible lubricants or cleaning agents that degrade the silicone material. | Consult compatibility charts and use only lubricants and cleaning agents specifically approved for silicone elastomers and the operating environment. |
A: This Industrial O-Ring, Silicone is manufactured from 316 Stainless Steel.
A: Chemical Processing Equipment, High-Temperature Fluid Handling, Pharmaceutical Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||