This high-performance industrial O-ring, crafted from robust Nylon, offers exceptional sealing capabilities in demanding environments. Its precise dimensions ensure a reliable, leak-free seal.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.173" |
| Outside Diameter | 7.990" |
| Cross Section | 0.219" |
A proven choice for industrial professionals, this Nylon O-ring (8.173" ID x 7.990" OD x 0.219" CS) delivers superior mechanical strength and resistance to abrasion. While Nylon offers excellent tensile strength and wear resistance, it's crucial to note its lower temperature and chemical resistance compared to elastomers like silicone or Viton. This makes it ideal for applications where extreme temperatures or aggressive chemical exposure are not primary concerns, but durability and dimensional stability are paramount. Typical applications include mechanical assemblies, fluid power systems, and general industrial sealing where moderate operating conditions prevail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free from debris and burrs. 2. Lubricate the O-ring lightly with a compatible lubricant if necessary. 3. Carefully install the O-ring into the groove, avoiding excessive stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently roll or press the O-ring into the groove, minimizing elongation to prevent premature failure and leakage. |
| Using incompatible lubricants. | Always verify lubricant compatibility with the Nylon material to prevent degradation and loss of sealing integrity. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Mechanical Assemblies, Fluid Power Systems, General Industrial Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||