This industrial silicone O-ring provides reliable sealing in challenging environments. Engineered for exceptional flexibility and resilience, it offers superior performance across a wide temperature range and against various media.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 8.153" |
| Outside Diameter | 0.959" |
| Cross Section | 0.088" |
A proven choice for industrial professionals, this silicone O-ring is designed for critical sealing applications. It boasts an inside diameter of 8.153 inches, an outside diameter of 0.959 inches, and a precise 0.088-inch cross-section, ensuring a tight and effective seal. The inherent properties of silicone rubber, including its excellent thermal stability, resistance to ozone and UV radiation, and good flexibility at low temperatures, make it suitable for food-grade applications, medical devices, and electrical insulation where purity and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully position the O-ring within its designated groove, avoiding stretching or twisting. 3. Apply a thin, compatible lubricant if necessary for easier assembly and to prevent damage during installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or stretching the O-ring during installation. | Install the O-ring without excessive force, allowing it to seat naturally within the groove. If stretching is unavoidable for assembly, ensure it does not exceed 10% of its free length. |
| Using incompatible lubricants or cleaning agents. | Consult the material compatibility chart for silicone to select a lubricant or cleaning agent that will not degrade the O-ring's material properties. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Food and Beverage Processing Equipment, Medical Devices and Pharmaceutical Equipment, Electrical Insulation and Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||