This industrial-grade silicone O-ring, manufactured from robust Aluminum 6061, provides exceptional sealing integrity in critical applications. Its precise dimensions ensure reliable performance under varied environmental conditions.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 0.421" |
| Outside Diameter | 7.961" |
| Cross Section | 0.181" |
Specified by design engineers worldwide, this Silicone O-Ring boasts an Inside Diameter of 0.421 inches and an Outside Diameter of 7.961 inches, with a precise Cross Section of 0.181 inches. Constructed from Aluminum 6061, a material renowned for its excellent strength-to-weight ratio and corrosion resistance, it offers superior durability and longevity. This combination of material and dimensional accuracy makes it ideal for high-pressure and extreme temperature environments, ensuring leak-free operation in fluid and gas handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of debris. 2. Carefully place the O-ring into the groove, avoiding stretching or twisting. 3. Apply a thin, compatible lubricant if recommended for the specific application to facilitate proper seating and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the gland, which can cause the O-ring to extrude. | Tighten the gland to the manufacturer's specified torque values to prevent over-compression. |
| Using incompatible lubricants or cleaning agents that degrade the silicone. | Consult the material compatibility chart and use only recommended lubricants and cleaning solutions. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Aerospace fluid systems, Automotive engine sealing, Industrial pump and valve seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||