This industrial-grade silicone O-ring, featuring a robust 304 stainless steel housing, provides exceptional sealing capabilities in challenging operational settings. Its precise dimensions ensure reliable performance and longevity.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 1.624" |
| Outside Diameter | 8.123" |
| Cross Section | 0.092" |
Designed for demanding industrial environments, this O-ring offers superior performance through its resilient silicone sealing element integrated within a corrosion-resistant 304 stainless steel construction. The precise dimensions of a 1.624" inside diameter, 8.123" outside diameter, and a 0.092" cross-section ensure a tight and reliable seal against fluids and gases across a wide temperature range. Its inherent material properties of silicone, such as flexibility and chemical resistance, combined with the strength of 304 stainless steel, make it ideal for applications in food processing, chemical handling, and high-pressure systems where integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean sealing surfaces thoroughly to remove any debris or residue. 2. Carefully insert the O-ring into its designated groove, ensuring it is seated evenly without twisting. 3. Apply a light lubricant compatible with the O-ring material if necessary to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring deformation or damage. | Install the O-ring gently, allowing its flexibility to conform to the groove. Use appropriate tools if necessary, ensuring they do not pierce or cut the material. |
| Incorrect O-ring size selection, resulting in leaks or improper sealing. | Verify the inside diameter, outside diameter, and cross-section against the application's groove dimensions and required compression ratio. |
A: This Industrial O-Ring, Silicone is manufactured from 304 Stainless Steel.
A: High-temperature fluid handling systems, Chemical processing equipment, Food and beverage manufacturing, Pharmaceutical production, Automotive sealing applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||