This industrial-grade Silicone O-ring, reinforced with Nylon, offers superior sealing capabilities in demanding environments. Its precise dimensions ensure a leak-proof fit for critical fluid and gas containment systems.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.438" |
| Outside Diameter | 7.518" |
| Cross Section | 0.253" |
Engineered for reliability and performance, this Silicone O-ring features an Inside Diameter of 7.438 inches, an Outside Diameter of 7.518 inches, and a robust 0.253-inch cross-section. The nylon reinforcement enhances its mechanical strength and resistance to extrusion under high pressure, while the silicone material provides excellent flexibility and a wide operating temperature range from -60°C to +200°C. This combination makes it suitable for applications requiring resistance to a broad spectrum of chemicals, oils, and solvents, ensuring long-term seal integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of debris. 2. Carefully stretch the O-ring over the component, avoiding sharp edges or excessive force. 3. Gently seat the O-ring into the groove, ensuring it is properly aligned and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, which can cause O-ring extrusion and premature failure. | Apply torque specifications as recommended for the assembly to avoid over-compression. |
| Using lubricants incompatible with silicone O-rings, leading to material degradation. | Consult the material compatibility chart and use only approved silicone-based lubricants. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Automotive Fuel Systems, Aerospace Fluid Connectors, Industrial Hydraulic and Pneumatic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||