Engineered for reliable sealing in demanding industrial applications, this brass-bodied silicone O-ring offers exceptional resistance to temperature and chemicals. Its precise dimensions ensure a secure fit and leak-free performance.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.389" |
| Outside Diameter | 8.323" |
| Cross Section | 0.150" |
Precision-manufactured to tight tolerances, this industrial silicone O-ring features an inside diameter of 7.389 inches and an outside diameter of 8.323 inches, with a substantial 0.150-inch cross-section. The robust brass core provides structural integrity and enhanced sealing force, while the high-grade silicone elastomer offers excellent flexibility, resistance to a wide temperature range (-60°C to +230°C), and compatibility with many industrial fluids and gases. Its construction makes it ideal for static and dynamic sealing applications where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully place the O-ring into its designated groove. 3. Gently compress the O-ring to achieve a snug fit, avoiding overstretching or pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply controlled, even pressure during installation to prevent tearing or deformation. |
| Installing on dirty or damaged mating surfaces. | Thoroughly clean and inspect all surfaces before installation to ensure a proper seal and prevent premature failure. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic and pneumatic systems, Chemical processing equipment, High-temperature applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||