This industrial-grade O-ring features a robust silicone core encased in brass, providing exceptional sealing integrity in demanding environments. Its precise dimensions ensure a reliable fit for critical fluid and gas containment.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 7.368" |
| Outside Diameter | 2.224" |
| Cross Section | 0.243" |
Manufactured under strict quality controls, this silicone O-ring boasts a 7.368" inside diameter, 2.224" outside diameter, and a 0.243" cross-section. The silicone material offers excellent flexibility, high-temperature resistance up to 200°C, and good chemical inertness, while the brass jacket enhances structural integrity and provides conductivity or grounding capabilities. Ideal for applications requiring a durable, high-performance seal with added mechanical strength and potential EMI/RFI shielding.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Seat the O-ring fully within the groove, ensuring no twists or pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or tears. | Apply gentle, even pressure and use appropriate lubrication if necessary to ease installation without damaging the O-ring. |
| Incorrect O-ring size, resulting in leakage or poor sealing. | Verify the O-ring dimensions (ID, OD, CS) precisely match the groove specifications before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: High-temperature fluid handling systems, Chemical processing equipment, Industrial electrical enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||