This industrial O-ring, crafted from robust carbon steel, is engineered for superior sealing in demanding industrial environments. Its precise dimensions ensure a reliable, leak-proof seal under extreme conditions.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 7.320" |
| Outside Diameter | 7.089" |
| Cross Section | 0.186" |
Purpose-built for heavy-duty applications, this carbon steel O-ring boasts an inside diameter of 7.320 inches, an outside diameter of 7.089 inches, and a cross-section of 0.186 inches. The inherent strength and temperature resistance of carbon steel make this seal ideal for high-pressure systems, chemical processing, and environments exposed to extreme thermal cycling. Its dense, non-porous structure prevents fluid absorption and degradation, ensuring long-term performance and reliability in critical sealing duties.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from debris. 2. Carefully lubricate the O-ring with a compatible lubricant to prevent damage during installation. 3. Install the O-ring into the groove, ensuring it sits flush and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| O-ring twisting during installation. | Lubricate the O-ring and groove properly, and avoid excessive force. Ensure the O-ring is seated correctly before mating components. |
| Using incompatible lubricants. | Consult chemical compatibility charts to ensure the lubricant is suitable for the O-ring material and the media being sealed. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic assemblies, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||