This industrial silicone O-ring, constructed from robust carbon steel, offers exceptional sealing capabilities. Engineered for precision, it ensures reliable performance in high-pressure and extreme temperature environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 6.244" |
| Outside Diameter | 10.880" |
| Cross Section | 0.274" |
Built to exacting engineering tolerances, this Silicone O-ring boasts an Inside Diameter of 6.244 inches, an Outside Diameter of 10.880 inches, and a precise 0.274-inch Cross Section. The carbon steel material provides superior strength and resistance to abrasion and corrosion, making it ideal for static and dynamic sealing applications across a wide temperature range. Its inherent flexibility and resilience ensure a tight, leak-proof seal in hydraulic systems, pneumatic equipment, and chemical processing machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean and free of debris. 2. Lightly lubricate the O-ring and the groove with a compatible lubricant. 3. Carefully install the O-ring into the designated groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or tears in the O-ring. | Apply gentle, consistent pressure and ensure proper lubrication to facilitate smooth installation. |
| Incorrect O-ring size selection, resulting in inadequate sealing or premature failure. | Verify the required Inside Diameter, Outside Diameter, and Cross Section against the application's specifications. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Hydraulic System Sealing, Pneumatic Actuator Seals, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||