This industrial-grade silicone O-ring provides superior sealing performance across a wide temperature range. Engineered for reliability in critical applications, it ensures leak-free operation and extended service life.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 7.277" |
| Outside Diameter | 4.352" |
| Cross Section | 0.092" |
Specified by design engineers worldwide, this carbon steel clad silicone O-ring (effective material due to clad nature, though core material is silicone) offers exceptional sealing capabilities. Its precise dimensions, including an Inside Diameter of 7.277 inches, an Outside Diameter of 4.352 inches, and a Cross Section of 0.092 inches, ensure compatibility with standard grooves and fittings. The silicone elastomer provides excellent flexibility, resistance to extreme temperatures (-60°C to +200°C), and good dielectric properties, making it suitable for a broad spectrum of industrial environments and fluid types where a robust, non-reactive seal is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from debris or damage. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp edges. 3. Position the O-ring squarely within its designated groove, ensuring even seating and no twists.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or stretching the O-ring during installation. | Install the O-ring with just enough tension to seat it properly, avoiding unnecessary stretching which can lead to premature failure and leakage. |
| Using the wrong O-ring size for the application groove. | Always verify the O-ring's dimensions against the groove specifications to ensure a correct and effective seal. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Automotive sealing systems, Aerospace fluid containment, Medical device components, Industrial machinery and equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||