This industrial-grade Silicone O-ring provides exceptional sealing performance in diverse environments. Engineered for reliability, it offers superior flexibility and resistance to extreme temperatures and a wide range of chemicals.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.155" |
| Outside Diameter | 5.041" |
| Cross Section | 0.116" |
Manufactured under strict quality controls, this Silicone O-ring is precisely machined to meet demanding industrial specifications. With an Inside Diameter of 7.155 inches and an Outside Diameter of 5.041 inches, its 0.116-inch cross-section ensures a robust seal. The material, Aluminum 6061, is selected for its excellent corrosion resistance and moderate strength, making it ideal for applications where chemical inertness and durability are paramount. This O-ring is engineered for reliable performance across a broad temperature spectrum, from cryogenic to high heat applications, and maintains its sealing integrity against various fluids and gases.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and damage. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring, ensuring it is seated evenly without twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, causing excessive compression and premature failure. | Apply only the necessary force to seat the O-ring. Refer to equipment specifications for correct compression values. |
| Using incompatible lubricants or cleaning agents that degrade the silicone material. | Always use lubricants and cleaning agents specifically rated for silicone and compatible with the sealed media. Consult material compatibility charts. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: High-temperature sealing in aerospace and automotive., Chemical processing and pharmaceutical equipment., Food and beverage processing where hygiene is critical..
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||