This industrial silicone O-ring, constructed with a robust nylon material, provides exceptional sealing in demanding environments. Its precise dimensions ensure reliable performance and longevity in critical applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.096" |
| Outside Diameter | 2.159" |
| Cross Section | 0.182" |
Manufactured under strict quality controls, this industrial O-ring features an Inside Diameter (ID) of 7.096 inches, an Outside Diameter (OD) of 2.159 inches, and a Cross Section (CS) of 0.182 inches. The core silicone elastomer offers excellent temperature resistance, flexibility, and chemical inertness, while the integrated nylon reinforcement enhances its mechanical strength and abrasion resistance. This combination makes it ideal for high-pressure systems, dynamic sealing, and environments where extrusion is a concern, ensuring a reliable seal against various fluids and gases.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove dimensions are within specified tolerances for the O-ring's cross-section. 2. Lubricate the O-ring and groove lightly with a compatible lubricant to prevent damage during installation. 3. Carefully install the O-ring into the groove, ensuring it is seated evenly and without twisting or stretching excessively.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| O-ring being twisted or spiraled in the groove. | Ensure the O-ring is installed without any twisting. A slight lubrication can aid in even seating. |
| Using excessive force during installation, leading to nicks or cuts. | Install with moderate pressure, utilizing appropriate tools if necessary to avoid direct contact with sharp edges. |
A: This Industrial O-Ring, Silicone is manufactured from Nylon.
A: Hydraulic and pneumatic systems, Automotive and aerospace sealing, Food and beverage processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||